Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799

Short Description:

Material : Spring steel/ stainless steel

Surface Finish: Silver/Black

Standard : DIN GB


Product Detail

Product Tags


Samples: Samples is Free,

1.There is no MOQ,if the items are in stock.
2.Mixed orders and sample orders are also accepted

If any other questions,please email us or send your inquiry details in the bottom!

As we  known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.

Material: Spring steel

Hardness46÷54 HRC  460÷580 HV

Note:E-type circlips are pushed into a groove on a shaft. They are DIN 6799 standard elements and are designed for use on small shafts.

Circular push-on retaining rings may be installed in applications where there is no groove.

Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for aesthetics and corrosion protection depending on the type of environment in which they are used.


These rings are equipped with assembly holes and are typically fitted and dismantled using special pliers. It is important to use the appropriate pliers as designed for each single ring. Please refer to the pliers data chart for the correct pliers/ring combination. If rings are over-expanded, elastic deformation of  rings can occur during assembly. This leads to very high bending stresses, so it is important to note:


During assembly, a ring should be expanded or closed only to the extent necessary to pass over the shaft or into the bore. The shaft and bore must be of the same nominal diameter as the ring.

Contact US: Skype/WhatsApp:  +8618833059594  WeChat:+8618713913345


Application :Apply in the axial trough of the machine or equipment in order to avoid the axial movement of shaft parts







  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products



       Sleeve type expansion anchor bolts Heavy Duty Expansion Anchors Details Expansion bolt" is a generic term that refers to three fastening components combined together: a threaded bolt, a properly sized nut and an expanding sleeve assembly. When assembled together, the force generated between the nut and bolt (when tightened) forces the outward expansion of the sleeve assemb...

    • Hexagon socket set screw with cone point din 914

      Hexagon socket set screw with cone point din 914

      Standard:Din914/Din915/Din916 Specification: M3-M20 or Custom Material: 35K,45#, 40Cr (SAE1045, 5140), SS304,SS316 Productive Process: Wire rod→Anneal→Acid cleaing→Draw wire→molding and rolling thread→Heat treatment→Surface treat →Packing Surface treat: Plain,Black oxide,Blue white zinc,Yellow zinc,Hot dip galvanized,Copper plating,Gold plating,Chromium Plating. Quality Control:Raw material inspect→process monitoring→Product test→Packaging check Certification:  ISO9001:2008    Packaging:prod...



      DIN934 Hex Nuts 1. hex  nut din934 2. Size: M6-48 3. Standard: DIN 934 4. Certification: ISO9001, SGS, CTI, ROHS   Product Features: Class: 4, 5, 6, 8, 10, 12 Size: M6-M100 Certificate:ISO9001 Material: Carbon steel, stainless steel, alloy steel Finish: Black, plain, zinc, HDG, etc  Packaging Details: Standard export packing or according to your demand  Supply Ability: 2000 Tons per Month Trade Term: FOB /CIF Payment Term: T/T, L/C   Hex nuts: sizes M3 a...

    • Yellow Zinc Plated Linch High Quality Safety Lock Pin Product manufacture in China Din11023

      Yellow Zinc Plated Linch High Quality Safety Lo...

      Linch pin:  DIN11023, linch pin, Wire Lock Pins, lock pin Pins Material: Carbon Steel / Stainless Steel Wires Material: Spring Steel Surface treatment: Yellow zinc plated, zinc plated, plain, Reference M range: M4.5-M12 Reference Length: 30mm-90mm All size or produce according with your request Linch pins are commonly used in the agricultural industry for securing implements onto the three point hitch of a. Linch pins may also be used in place of an for securing hitch pins   The safety ...

    • Threaded Rod/Stud Bolt DIN975

      Threaded Rod/Stud Bolt DIN975

      Thread rod DIN975, stainless steel 201 304 316 full thread stud bolt supplier. 1m 2m 3m different length with different diameter. Color: silver/blue white   Packing detail: Product bulk in plastic bag→Wood pallet; Delivery: By air, by sea or by express service Payment terms: T/T, Western union   What is thread rod? A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be us...

    • High Tensile Bolt

      High Tensile Bolt

       Hex bolts refer to fasteners composed of head and screw. Product Description Bolts are divided into iron bolts and stainless steel bolts according to material, that is, hex head bolts (partially threaded) -C and hex head bolts (full thread) -C, also known as Hex head bolts (rough) wool hex head bolts, black iron screws.  Classification ...