We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Factory source DIN6799 Stainless Steel E Circlip China Supplier, We always concertrating on developing new creative product to meet request from our clients all over the world. Join us and let's make driving safer and funnier together!
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for China Circlip Supplier, Circlip Factory, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal items. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Thorough data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to allow you to get complete acknowledge about our products and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
Size:M8-M30

Samples: Samples is Free,

1.There is no MOQ,if the items are in stock.
2.Mixed orders and sample orders are also accepted

If any other questions,please email us or send your inquiry details in the bottom!

As we  known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.

Material: Spring steel

Hardness: 46÷54 HRC  460÷580 HV

Note:E-type circlips are pushed into a groove on a shaft. They are DIN 6799 standard elements and are designed for use on small shafts.

Circular push-on retaining rings may be installed in applications where there is no groove.

Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for aesthetics and corrosion protection depending on the type of environment in which they are used.

These rings are equipped with assembly holes and are typically fitted and dismantled using special pliers. It is important to use the appropriate pliers as designed for each single ring. Please refer to the pliers data chart for the correct pliers/ring combination. If rings are over-expanded, elastic deformation of  rings can occur during assembly. This leads to very high bending stresses, so it is important to note:

During assembly, a ring should be expanded or closed only to the extent necessary to pass over the shaft or into the bore. The shaft and bore must be of the same nominal diameter as the ring.

Contact US: Skype/WhatsApp:  +8618833059594  WeChat：+8618713913345

Application :Apply in the axial trough of the machine or equipment in order to avoid the axial movement of shaft parts