China Cheap price Washer - DIN125 DIN436 Washers – Ruiye
China Cheap price Washer - DIN125 DIN436 Washers – Ruiye Detail:
DIN125 Flat Washer/DIN436 Square Washer
The flat washer is mainly punched out with an iron plate. The shape is generally a flat washer with a hole in the middle. There are calculation formulas in "Quality Fasteners for Standard Fasteners" published by China Standard Press. The formula is: Thousand piece weight m = 0.00785 × {3.1416 / 4 × washer height × [square of outer diameter-square of inner diameter]
The usage of flat washer
1. Increase the contact area between the screw and the machine.
2. Eliminate the damage of the spring pad to the surface of the machine when removing the screws. When in use, it must be a spring pad and a flat pad, the flat pad is next to the machine surface, and the spring pad is between the flat pad and the nut.
Basic Information
Flat washers are usually thin pieces of various shapes to reduce friction, prevent leaks, isolate, prevent loosening or spread pressure. This component is found in many materials and structures to perform a variety of similar functions. Limited by the materials and processes of threaded fasteners, the bearing surfaces of fasteners such as bolts are not large. Therefore, in order to reduce the compressive stress of the pressure bearing surface to protect the surface of the connected component, a washer is used. To prevent the loosening of the connection pair, anti-loose spring washers and multi-tooth lock washers, round nut stop washers, and saddle-shaped, wave-shaped, and tapered elastic washers are used.
The flat washer is mainly used to reduce the pressure. When the axial force of some parts is large, it is easy to press the washer into a dish shape. At this time, it can be solved by using materials and increasing the hardness.
Any other products
Contact me freely, send me inquiry, thanks for your checking!
Product detail pictures:
Related Product Guide:
Cooperation
Now we have highly developed devices. Our items are exported towards the USA, the UK and so on, enjoying a great popularity among the customers for China Cheap price Washer - DIN125 DIN436 Washers – Ruiye , The product will supply to all over the world, such as: Colombia, UK, Paraguay, The company has numbers of foreign trade platforms, which are Alibaba,Globalsources,Global Market,Made-in-china. "XinGuangYang" HID brand products sell very well in Europe, America, Middle East and other regions more than 30 countries.
By Edward from azerbaijan - 2017.08.18 18:38
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Hilda from Malta - 2017.04.08 14:55
Related products
-
Chinese wholesale Flange Nuts - China manufact...
An acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon...
-
Special Design for Outside Snap Ring - Retaini...
Available Sizes: 8 mm to 400 mm Standard Material: Carbon Spring Steel Standard Finish: Phosphate and oil Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings. Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chroma...
-
Chinese Professional I Shaped Foundation Anchor...
Korean anchor bolt Product Description The Sleeve Anchor is constructed of high quality steel parts. Each part is zinc plated and assembled into a complete ready-to-use anchor. The anchor consists of a threaded stud with an outwardly flared cone-shaped end. A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone. A washer and hex nut are then assembled on the stud to complete the anchor. The anchor works on a true expansion principle: Tighte...
-
Chinese Professional Non-Standard Screw - Hot ...
Can you nail into concrete? Using concrete nails to nail boards into concrete slabs can be an inexpensive project when you do it manually. With just a hammer drill, masonry bit, concrete nails, and a hammer, you can accomplish roughly the same feat as you would by using a gun-style power nailer. Concrete Nail: Uses: Suitable for the connection of decoration, decoration industry, hard wood, light wood keel. Suitable for hard wood, brick wall and cement mortar components. It is widely u...
-
High Performance External Style Retaining Ring ...
Available Sizes: 8 mm to 400 mm Standard Material: Carbon Spring Steel Standard Finish: Phosphate and oil Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings. Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chroma...
-
Wholesale Price China Yellow Zinc Anchor Bolt -...
Korean anchor bolt Product Description The Sleeve Anchor is constructed of high quality steel parts. Each part is zinc plated and assembled into a complete ready-to-use anchor. The anchor consists of a threaded stud with an outwardly flared cone-shaped end. A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone. A washer and hex nut are then assembled on the stud to complete the anchor. The anchor works on a true expansion principle: Tighte...
